Applications


Single Probe

 Single Probe

  • Suitable to control units, types SQ, PSQ und QLC

  • Easily mountable under the conveyor belt between two roller stages

  • Also available as tandem probe (double probe) if depth of material is more than about 100 mm (4 inches)

  • Usable straightforwardly in areas with frequency converters and magnets

  • Also very well suitable for gravel, slag and iron ore (Compensation of effects caused by iron oxides up to 100 %)

Single Probe

  • Single- and tandem probe to suit the belt width

  • Standard sizes 500 mm up to 2000 mm

  • Types for high temperature up to 100 C
    ( = 212 F), f. i. for the cement industry

  • Other sizes and executions on request

SQ Control Unit

 SQ Control Unit

  • Automatic self-adjustment

  • Automatic self-monitoring

  • Sensitivity: continuously adjustable

  • Detecting all kinds of metal, ferrous and non-ferrous

  • Very weak detection of ferric oxides (slag, magnetite, iron ore)

  • Detached terminal connection box

  • Metal alarm (output relay with NC/NO contact)

  • Disturbance (output relay with NC/NO contact)

  • Wide range power supply (100 - 240 V AC)

Distance Meter (WMG)

 Distance Meter, Type WMG

  • Indicates all positions of detected tramp metals after the conveyor belt has stopped

  • 60mm large number display

  • Point correct display independent of the belt speed

Sandbag Marking Device

 Sandbag Marking Device

  • Red sandbag

  • Marks one detected tramp metal

  • Signal "sandbag in position" (optionoal)

Tandem Probe

 Tandem Probe (Double Probe)

  • Recommended if depth of conveyed material is more than 100 mm ( = 4 inches)

  • Hight of aperture according depth of conveyed material and depth of troughing

  • A Single probe can also after mounting be extended to a Tandem Probe

QLC Control Unit

 QLC Control Unit

  • Low cost control box for coarse protection

  • Automatic self-adjustment

  • Sensitivity: continuously adjustable

  • Detecting all kinds of metal, ferrous and non-ferrous

  • Very weak detection of ferric oxides (slag, magnetite, iron ore)

  • Metal alarm (output relay with NC/NO contact)

  • Wide range power supply (100 - 240 V AC)

Frame Probe (PSQ/RA)

 Frame Probe, Type PSQ/RA

  • Very well suitable for mineral processing, building rubble and demolition material, mining and recycling

  • The sensitivity is almost unchanged within the whole opening of probe

Frame Probe with Control Unit

 PSQ Control Unit

  • Customized cabinet with interior lighting,
    overvoltage protection, socket-outlet and
    additional output signals